Engineering

An Analog Electronics Companion: Basic Circuit Design for Engineers and Scientists

2003ref. 5769557Cambridge University Press 2003. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item1600grams ISBN:9780521798389 Cambridge University Press hardcover

Anybook.com · United Kingdom£53.63≈ €63.82

Hamilton, ScottBiblio.com

An Analog Electronics Companion: Basic Circuit Design for Engineers and Scientists

2003ref. 9972461Cambridge University Press 2003. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item1600grams ISBN:9780521798389 Cambridge University Press hardcover

Anybook.com · United Kingdom£88.00≈ €104.73

Hamilton, ScottBiblio.com

An Analog Electronics Companion: Basic Circuit Design for Engineers and Scientists and Introduction to SPICE Simulation

2007ref. 9957076Cambridge University Press 2007. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item1450grams ISBN:9780521687805 Cambridge University Press paperback

Anybook.com · United Kingdom£79.86≈ €95.04

Franz, Norman CBiblio.com

An Analysis of the Wood-Cutting Process

1958ref. 101G2829USA: The University of Michigan Press 1958. Book. Fair. Hardcover. First Edition. 4to - over 9¾" - 12" tall. 152 pages. List of literature cited. ".Endeavors to establish what takes place when wood is machined with a cutting tool and pursues the factors controlling the identified phenomena. Directed primarily to a consideration of aspects associated with the machining of wood parallel to the grain." - from introduction. Usual library markings. Somewhat above-average external wear. Binding intact. A sound reference copy. The University of Michigan Press Hardcover

RareNonFiction.com · Canada$79.95≈ €71.29

Franz, Norman C.MareMagnum

An Analysis of the Wood-Cutting Process

1958152 pages. List of literature cited. "...Endeavors to establish what takes place when wood is machined with a cutting tool and pursues the factors controlling the identified phenomena... Directed primarily to a consideration of aspects associated with the machining of wood parallel to the grain." - from introduction. Usual library markings. Somewhat above-average external wear. Binding intact. A sound reference copy. Book

RareNonFiction.com · Canada€79.95

Sean MoranBiblio.com

An Applied Guide to Process and Plant Design

2015ref. 4958742Butterworth-Heinemann 2015. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item1050grams ISBN:9780128002421 Butterworth-Heinemann hardcover

Anybook.com · United Kingdom£74.73≈ €88.93

British Overseas Airways Corporation, Operational Engineering and Research SectionABAA

An Appreciation of the Take-Off Regime of the Boeing 707-436.

1960ref. vas5233N.l.: British Overseas Airways Corp. 1965. Reprint of a Report first published in October 1960. Quarto stiff blue wrappers typewritten 17 pp. 7 graphs one 8 x 10 photographs. Very Good. British Overseas Airways Corp., 1965. Reprint of a Report first published in October 1960. unknown books

Lighthouse Books, ABAA · United States$10.00≈ €8.92

National Academies of Sciences, Engineering, and MBiblio.com

An Approach for Assessing U.S. Gulf Coast Ecosystem Restoration: A Gulf Research Program Environmental Monitoring Report Consensus Study Report

ref. 0309263395.Gpaperback. Good. Access codes and supplements are not guaranteed with used items. May be an ex-library book. paperback

Bonita · United States$55.57≈ €49.55

Booker, Henry G.MareMagnum

An Approach to Electrical Science

1959... Hardcover, fair condition, with somewhat rubbed boards, some scuffs and scratches. Outside hinges repaired with blue cloth tape around sp. Edgwr: cloth worn off and/or fraying on brd bottoms, corners, top r. fr.r. brd edge. lightly slanted somewhat co

George Cross Books · United States€12.04

Division on Engineering and Physical SciencesBiblio.com

An Assessment of ARPA-E

ref. 0309459451.Gpaperback. Good. Access codes and supplements are not guaranteed with used items. May be an ex-library book. paperback

Bonita · United States$78.48≈ €69.98

National Academies of Sciences, Engineering, and MBiblio.com

An Assessment of Illness in U.S. Government Employees and Their Families at Overseas Embassies

ref. 0309681375.Gpaperback. Good. Access codes and supplements are not guaranteed with used items. May be an ex-library book. paperback

Bonita · United States$89.09≈ €79.44

National Academies of Sciences, Engineering, and MBiblio.com

An Assessment of Native Seed Needs and the Capacity for Their Supply: Final Report Consensus Study Report

ref. 0309690250.Gpaperback. Good. Access codes and supplements are not guaranteed with used items. May be an ex-library book. paperback

Bonita · United States$53.97≈ €48.12

National Academies of Sciences, Engineering, and MBiblio.com

An Assessment of the National Institute of Standards and Technology Physical Measurement Laboratory: Fiscal Year 2015

ref. 0309439361.Gpaperback. Good. Access codes and supplements are not guaranteed with used items. May be an ex-library book. paperback

Bonita · United States$60.36≈ €53.82

National Research Council of the National Academies, Division on Engineering and Physical Sciences, Board on Energy and EnvironmBiblio.com

An Assessment of the Prospects for Inertial Fusion Energy

2013ref. 81285Washington DC: The National Academies Press 2013. Prepublication copy--subject to further editorial correction. Wraps. Good. 8 16 56 54 24 65 pages. Footnotes. Illustrations Tables and Figures. Rear cover creased. The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects many nations have initiated research and development R&D programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy MFE and inertial fusion energy IFE. An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion ICF in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant. The committee's final report represents the consensus of the committee after six meetings see Appendix C for the meeting agendas. The first four meetings were concerned mainly with information gathering through presentations while the final two meetings focused on carrying out a detailed analysis of the many important topics needed to complete the committee's assessment. This report describes and assesses the current status of inertial fusion energy research in the United States identifies the scientific and engineering challenges associated with developing inertial confinement fusion as an energy source compares the various technical approaches and finally provides guidance on an R&D roadmap at the conceptual level for a national program aimed at the design and construction of an inertial fusion energy demonstration plant including approximate estimates where possible of the funding required at each stage. At the outset of the study the committee decided that the fusion-fission hybrid concept was outside the scope of the study. While they are certainly interesting subjects of study comparisons of inertial fusion energy to magnetic fusion energy or any other potential or available energy technologies such as wind or nuclear fission were also outside the committee's purview. Although the committee carried out its work in an unclassified environment it was recognized that some of the research relevant to the prospects for inertial fusion energy was conducted under the auspices of the nation's nuclear weapons program and has been classified. Therefore the NRC established the separate Panel on the Assessment of Inertial Confinement Fusion ICF Targets to explore the extent to which past and ongoing classified research affects the prospects for practical inertial fusion energy systems. The panel was also tasked with analyzing the nuclear proliferation risks associated with IFE; although that analysis was not available for inclusion in the interim report the committee reviewed the panel's principal conclusions and recommendations on proliferation and these are included in this final report of the committee. The target physics panel exchanged unclassified information informally with the committee in the course of the study process and the committee was aware of the panel's conclusions and recommendations as they evolved. The panel produced both a classified and an unclassified report; the latter was timed so as to be available to inform this committee's final report; the Summary of the panel's unclassified report prepublication version is included as Appendix H. The National Academies Press paperback

Ground Zero Books · United States$100.00≈ €89.17

National Research Council Division of Engineering and Physical Sciences Board on Energy and Environmental Systems, Board onBiblio.com

An Assessment of the Prospects for Inertial Fusion Energy

2013ref. 67299Washington DC: The National Academices Press 2013. Prepublication Copy--Subject to Further Editiorial Correction. Wraps. Very good. Cover has some wear and soiling. Various paginations approximately 225 pages. Includes illustrations. Bbliography of previous ICF studies consulted. Glossary. Title continues: "Physics and Astronomy. Committee on the Prospects for Inertial Confinement Fusion Energy Systems." From a National Academies internet posting: "The energy produced by nuclear fusion has the potential to provide a low-carbon base-load source of electricity; however significant scientific and engineering efforts are still required before the feasibility of a commercial fusion plant can be established. Initiating fusion based upon magnetic confinement and inertial confinement of the fusion plasma have been studied for decades. In inertial confinement fusion ICF a driver delivers energy to the surface of a pellet of fuel heating and compressing it. There are many approaches for initiation fusion using inertial confinement. For example different driver concepts have very different operating conditions and characteristics. Understanding the strengths and weaknesses of each approach is central to the effort to develop IFE as a power source. Given the current level of activity in ICF research now is an appropriate time to consider how to proceed regarding inertial fusion as a potential power source. An NRC committee and panel will be formed to provide findings and recommendations to advise DOE on the development of an R&D roadmap for inertial fusion energy. All the approaches to ICF will require much investigation and will need to be considered in any long-term R&D strategy." The National Academices Press paperback

Ground Zero Books · United States$100.00≈ €89.17

Sir Eric RollBiblio.com

An Early Experiment In Industrial Organization : being a history of the firm of Boulton and Watt 1775 to 1805

1968ref. 005645London: Frank Cass and Co Limited 1968. The partnership of Matthew Bolton 1728-1809 and James Watt 1736-1819 from the mid-1770s onwards for the purpose of developing Watt's improved steam engine has long been recognized as a vital element in the Industrial Revolution in Britain. John Lord's Capital and Steam Power. First edition 1923; second edition 1966 Frank Cass dealt mainly with the firm's part in familiarizing industrialist and businessman with this new form of power. In 1930 Sir Eric Roll's book appeared in which the emphasis was differently placed. There is much more detail about the way in which Bolton and Watt and their sons organized and developed the firm internally secured orders for steam engines and executed these orders. There are also important chapters dealing with the recruitment and training of the firm's workers the early provision of the welfare schemes for them and the great changes after 1795-1796 whereby the firm became one of the largest in Britain. This is a pioneer study in the genesis of modern industrial management. 320 pp including Index A FINE AS NEW copy. This book will be POSTED AT OUR STANDARD RATES FULLY INSURED UK ONLY . Please email for further details. Not Inscribed or Signed. This is the Facsimile Edition of 1968. Green Cloth. FINE NEW /FINE NEW. Illus. by Numerous Charts and One Pullout Photographic Print . 8vo - over 7¾" - 9¾". HARDBACK. Frank Cass and Co Limited Hardcover

Bookfarm · United Kingdom£48.00≈ €57.12

Kline, PaulMareMagnum

An Easy Guide to Factor Analysis

2008No marks or inscriptions. No creasing to covers or to spine. A very clean very tight copy with bright unmarked boards and no bumping to corners. 194pp. A simple, brief and non-frightening account of factor analysys for all students of psychology and the social sciences.

Godley Books · United Kingdom€19.90

Lallier, Ernest VBiblio.com

An Elementary Manual of the Steam Engine - Containing Also a Chapter on the Theory Construction and Operation of Internal Combustion Engines for the Operating Engineer.

1913ref. 62607337New York: D. Van Nostrand Company 1913. Book. Fair. Hardcover. First Edition. 8vo - over 7¾" - 9¾" tall. 266 pages including index. Illustrated with line drawings. Intended for students and young men engaged in the actual operation of steam plants. Chapters include: Reciprocating Steam Engines; Governors; Engine Calculations; The Indicator; Heat; Boilers; Pumps; Corliss Engines; Pipes and Fittings; Rotary Engines; Internal Combustion Engines; Lubrication. Former owner's name and date upon front endpaper. Half-inch tear to top of title page. Gilt lettering upon spine is worn but remains legible. Black boards well worn. Serviceable copy. D. Van Nostrand Company Hardcover

RareNonFiction.com · Canada$99.95≈ €89.12

Mahan, DH and Barlow, P (ed) D HBiblio.com

An Elementary Course of Civil Engineering

1848ref. 5788951A. Fullarton and Co. 1848. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition suitable as a study copy. Re-bound by library. Large grubby and sun faded red cloth 8vo. Gilt lettering on sunned backstrip. Bumped corners and some fraying and chipping to backstrip. Taped hinges. Pages are secure and clear of markings though aged toned grubby and foxed. Contains several plates at rear. Trimmed. Please note the Image in this listing is a stock photo and may not match the covers of the actual item1050grams ISBN: A. Fullarton and Co. hardcover

Anybook.com · United Kingdom£400.00≈ €476.03

Lallier, Ernest V.MareMagnum

An Elementary Manual of the Steam Engine - Containing Also a Chapter on the Theory, Construction and Operation of Internal Combustion Engines for the Operating Engineer.

1913266 pages including index. Illustrated with line drawings. Intended for students and young men engaged in the actual operation of steam plants. Chapters include: Reciprocating Steam Engines; Governors; Engine Calculations; The Indicator; Heat; Boilers; Pumps; Corliss Engines; Pipes and Fittings; Rotary Engines; Internal Combustion Engines; Lubrication. Former owner's name and date upon front endpaper. Half-inch tear to top of title page. Gilt lettering upon spine is worn but remains legible. Black boards well worn. Serviceable copy. Book

RareNonFiction.com · Canada€99.95

Horner, JosephMareMagnum

An Elementary Treatise on Hoisting Machinery

1903Green cloth boards showing minor wear, particularly at edges of spine; bumped a little at corners. Gilt titles on spine. Hinges cracked, previous owner's name on half - title; contents otherwise clean and sound throughout. With 215 engravings. TPW Used

Psychobabel & Skoob Books · United Kingdom€69.76

Tarn, E. W.MareMagnum

An Elementary Treatise on the Construction of Roofs of Wood and Iron

1901Hardcover. No Jacket. Boards and spine are tanned and foxed. Spine ends are nicked. Leading corners are a little bumped. Previous owner's name penned on front pastedown. Five centimetre tear on page 55. Hinge is visible between a few pages. Binding remains intact, contents are clear. AM Used

Psychobabel & Skoob Books · United Kingdom€20.13

Engineering

Century

Language

Bookseller country

Photos

Added

Subjects

Catalogues

Century

Language

Bookseller country

Photos

Added

Subjects

Catalogues

Century

Language

Bookseller country

Photos

Added

Subjects

Catalogues